Program Guide uses time set on the box. The Box gets time from the time server that is set in settings. If there is no program guide available then NTP server is not set properly. Follow the instructions below to set up the NTP server: Click SET to go to System Settings screen. Select Servers and […]
Category: 4. MAG 250/254/256 BOXES
How to change resolution
To change resolution follow the instructions below: Press SET on the remote. In the System settings select Video and press OK. Go to Video Output Mode and using the right arrow change the resolution: – If your Alfabox is connected to the TV via composite cable – select: NTSC 480i. – If your Alfabox is […]
Issue: Wrong date on the screen or no EPG
Electronic Program Guide (EPG) uses time set on the box. The Box gets time from the time server that is set in settings. If there is no EPG available then NTP server is not set properly. Follow the instructions below to set up the NTP server Click SET to go to System Settings screen. Select Servers […]
Alfabox Features
If you have been enjoying watching service on your computer and would like to start watching on the TV just get Alfabox TV receiver and join customers who already switched from watching on the computer to the comfort of watching on the TV! Alfabox has a very simple user interface, a comfortable remote control and […]
Alfabox UX2 specification
Alfabox advantages: High quality of sound and image (supports all modern video and audio formats, including full HD) Compatible with any TV (HDMI and RCA television compatible) Flawless Design (lightweight, elegant design that will fit in with any interior) Maximum Comfort (remote control enables you to control not only set-top-box but also the other devices) […]
Alfa Box Manual
Alfa box UX1/2/3 MANUAL Exterior Front panel for Alfa3 Back panel Front panel for Alfa 1 and 2 Back panel Remote control Old model Programmable old model RC has two LED lights to indicate of button presses and operational modes. The green indicator lights when any button pressed on the base RC section. Red indicator […]
Alfabox UX3: Reset to default settings, boot mode change
Press and hold service button (FN) on the back side of STB until STB is power off, or during 2 seconds after power on. Switching between modes done by releasing button at the specific time according to the LED indication. There are 4 modes: STB load from first U-boot; Switch to alternative NAND; Reset to […]
How to update firmware on Alfabox UX3 (message on the screen TV, Videoteka, Settings)
Below you can find a detailed process of firmware updating to new stable version: Go to box settings/software update Press “OK” on the remote to verify and get pop-up information page Press “F1” on the remote to update It will be restarted automatically when it’s done Important! Do NOT restart/turn-off the box while it’s updating.
Alfabox UX3 specification
Alfabox advantages: High quality of sound and image (supports all modern video and audio formats, including full HD) Compatible with any TV (HDMI and RCA television compatible) Flawless Design (lightweight, elegant design that will fit in with any interior) Maximum Comfort (remote control enables you to control not only set-top-box but also the other devices) […]
Alfabox UX1 specification
Alfabox advantages: High quality of sound and image (supports all modern video and audio formats, including full HD) Compatible with any TV (HDMI and RCA television compatible) Flawless Design (lightweight, elegant design that will fit in with any interior) Maximum Comfort (remote control enables you to control not only set-top-box but also the other devices) […]